Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 33 van 240
Before the journey 3
Exsis I/T - 01/23-1 - EHG-0027-02EN 33
When transporting vehicles powered by gasoline, diesel, gas, or other
flammable material, make sure that the tank of the transported vehicle
is completely empty. When transporting electric bikes, we also recom-
mend that you remove and securely stow the battery before com-
mencing travel.
Rear garages and rear storage compartments are not designed at the
factory to function as sleeping or living areas for people or animals.
These spaces are not provided with ventilation at the factory. There is
a risk of suffocation due to a lack of oxygen.
Observe that only factory-fitted equipment components (e.g. storage
nets) are permitted on rear doors/rear flap.
Observe the maximum permissible load of 5 kg for the factory-attached
storage nets.
Depending on the vehicle equipment, clamping rails with clamping eye-
lets are mounted in the rear garage or in the rear storage space. Always
secure loads onto the clamping eyelets. Always use tightening straps or
lashing nets for securing the load, never rubber expanders.
When clamping loads, always check that the clamping eyelets are
placed tightly in the clamping rails. If the clamping eyelet is not anchored
tightly in the clamping rail, the load may slide or loosen during forcible
movements of the steering wheel or when braking.
Distribute the load evenly. Excessive spot loads can lead to damages of
the floor covering.
Use the supporting system offered by your dealer if two-wheelers are
transported in the rear garage.
Do not drill into the vehicle floor. Do not screw any screws into the vehi-
cle floor.
When loading rear garages and rear storage compartments, please observe
the following instructions to ensure safe driving:
⚫ Baggage and items carried in rear garages and rear storage compart-
ments must also be evenly distributed in accordance with the section
"Load securing and load distribution" (page 26).
⚫ All items stowed in rear garages and rear stowage compartments must
be fastened and secured accordingly using suitable clamping systems at
the existing fastening points provided at the factory.
⚫ Before driving off, it must be ensured that the rear garage or rear stor-
age compartment is properly locked.
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
