Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 230 van 240
17 Legal notes on weight-related information
230 Exsis I/T - 01/23-1 - EHG-0027-02EN
3. Mass of the passengers
The mass of the passengers is set a standard value of 75 kg for each
seat provided by the manufacturer, regardless of the actual weight of the
passengers. The mass of the driver is already included in the mass in
running order (see no. 2 above) and is therefore not included again. In
the case of a motorhome with four permitted seats, the mass of the pas-
sengers is therefore 3 x 75 kg = 225 kg.
4. Optional equipment and actual mass of the vehicle
Optional equipment (also: additional equipment) includes, according to
the legal definition, all optional equipment parts not included in the
standard equipment which are fitted to the vehicle under the responsibil-
ity of the manufacturer – i.e. ex works – and can be ordered by the cus-
tomer (e. g. awning, bicycle or motorbike carrier, satellite system, solar
system, oven, etc.). Information on the individual or package weights of
the optional equipment that can be ordered can be found in our sales
documents. Optional equipment in this sense does not include other ac-
cessories that are retrofitted by the dealer or you personally after the
vehicle has been delivered ex works.
The mass of the vehicle in running order (see no. 2 above) and the
mass of the optional equipment fitted to a specific vehicle at the factory
are together referred to as the actual mass. You will find the correspond-
ing information for your vehicle after handover under item 13.2 of the
Certificate of Conformity (CoC). Please note that this specification also
represents a standardised value. Since the mass in running order – as
an element of the actual mass – is subject to a legally permissible toler-
ance of ± 5 % (see no. 2), the actual mass may also deviate accordingly
from the stated nominal value.
5. Pay-mass and minimum pay-mass
The installation of optional equipment is also subject to technical and
legal limits: Only so much optional equipment can be ordered and fitted
at the factory that sufficient free weight remains for baggage and other
accessories ("pay-mass") without exceeding the technically permissible
maximum laden mass. The pay-mass is calculated by subtracting the
mass in running order (nominal value according to sales documents,
see no. 2 above), mass of the optional equipment and the mass of the
passengers (see no. 3 above) from the technically permissible maximum
laden mass (see no. 1 above). The EU regulations stipulate a fixed mini-
mum pay-mass for motorhomes, which must remain as a minimum for
baggage or other non-factory-fitted accessories. This minimum pay-
mass is calculated as follows:
Minimum pay-mass in kg ≥ 10 x (n + L)
Where: "n" is the maximum number of passengers plus the driver and
"L" is the overall length of the vehicle in metres.
For a motorhome with a length of 6 m and 4 approved seats, the mini-
mum pay-mass is therefore e. g. 10 kg x (4 + 6) = 100 kg.
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
