Hymer Exsis I (2025) handleiding
Handleiding
Je bekijkt pagina 231 van 240
Legal notes on weight-related information 17
Exsis I/T - 01/23-1 - EHG-0027-02EN 231
To ensure that the minimum pay-mass is maintained, there is a maxi-
mum combination of optional equipment that can be ordered for each
vehicle model. In the above example with a minimum pay-mass of
100 kg, the total mass of optional equipment for a vehicle with four per-
mitted seats and a mass in running order of 2,850 kg should not exceed
325 kg:
3,500 kg technically permissible maximum laden mass
- 2,850 kg mass in running order
- 3 x 75 kg mass of the passengers
- 100 kg minimum pay-mass
= 325 kg maximum permissible mass of optional equipment
It is important to note that this calculation is based on the default value
for mass in running order as defined in the type-approval procedure,
without taking into account the permissible weight deviations for mass in
running order (see no. 2 above). If the maximum permissible value for
the optional equipment of (in the example) 325 kg is almost or com-
pletely exhausted, an upward weight deviation can therefore result in the
minimum pay-mass of 100 kg being met mathematically using the de-
fault value for the mass in running order, although in fact there is no cor-
responding load capacity. Here, too, an example calculation for a vehi-
cle with four seats, whose real weighed mass in running order is 2 %
above the nominal value:
3,500 kg technically permissible maximum laden mass
- 2,907 kg real weighed mass in running order (+ 2 % compared to the
stated value of 2,850 kg)
- 3 x 75 kg mass of the passengers
- 325 kg optional equipment (maximum permissible value)
= 43 kg actual load capacity (< minimum pay-mass of 100 kg)
In order to avoid such a situation, HYMER further reduces the maximum
permissible weight of the total optional equipment that can be ordered
on a model-specific basis. The limitation of optional equipment is in-
tended to ensure that the minimum pay-mass, i.e. the legally prescribed
free mass for baggage and retrofitted accessories, is actually available
for the vehicle load capacity of the vehicles delivered by HYMER.
Since the weight of a specific vehicle can only be determined when it is
weighed at the end of the line, in very rare cases a situation may arise in
which the minimum pay-mass at the end of the line is not guaranteed,
despite this limitation of optional equipment. In order to guarantee the
minimum pay-mass even in these cases, HYMER will check together
with your trade partner and you before delivery of the vehicle whether,
for example, the vehicle is loaded up, seats are reduced or optional
equipment is removed.
Bekijk gratis de handleiding van Hymer Exsis I (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | Exsis I (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25423 MB |
