Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 29 van 286
Before the journey 3
B-MC I/T - 01/23-1 - EHG-0016-03EN 29
A = distance between storage space and front axle in cm
G = weight of the load in the storage space in kg
R = wheelbase of the vehicle (distance between axles) in cm
Measure the external distances horizontally from the centre of the front
wheel to the centre of the storage space or to the centre of the back
wheel.
The technically permissible maximum mass on the axle or group of axles
(hereinafter referred to as axle load) describes the vehicle- and axle-specific
load that may be transferred from the wheels of an axle or group of axles to
the road surface. The axle load is a value set by the manufacturer which the
vehicle must never exceed for safety reasons, even in laden condition. You
will find information on the axle loads of your vehicle in the registration pa-
pers and on the factory plate of the body manufacturer attached to the ve-
hicle.
1 Vehicle type
2 Consecutive serial number
3 Manufacturer
4 Vehicle type approval
5 Body stage
6 Chassis number
7 Technically permissible maximum
mass
8 Permissible total towing mass (with
caravan coupling option)
9 Permissible axle load for axle 1
10 Permissible axle load for axle 2
Fig. 2 Factory plate
If the technically permissible maximum mass on the axle is exceeded,
the vehicle may be damaged (e.g. due to a broken axle or burst tyre)
and driving may be considerably impaired. This creates the risk of the
vehicle getting out of control and you endangering yourself and other
road users. We therefore recommend weighing the finally laden ve-
hicle including all passengers before the start of the journey so that
compliance with the axle load and the technically permissible maxi-
mum laden mass is always guaranteed. For this purpose, there is the
possibility of weighing/checking the vehicle on public scales or at indi-
vidual dealers.
Please note that the axle loads on the respective axles or axle groups
may differ and therefore read the information provided in the registration
papers carefully.
If the vehicle exceeds the technically permissible maximum mass on the
axle specified by the manufacturer in the actual mobile operation, there
is a risk of legal consequences such as a fine or the loss of insurance.
It is possible that the chassis manufacturer of your vehicle specifies a
minimum load for the front axle in order to obtain optimum handling.
Therefore, please also always take into account the information on this
from the instruction manual of the chassis manufacturer.
Explanation
Technically permissible
maximum mass on the
axle (axle load)
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
