Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 28 van 286
3 Before the journey
28 B-MC I/T - 01/23-1 - EHG-0016-03EN
When loading the vehicle, please observe the following instructions to en-
sure safe mobile operation:
⚫ The luggage and other items carried in the vehicle must be evenly distri-
buted between the left and right sides of the vehicle.
⚫ Heavy or bulky objects should be stored as close to the ground as pos-
sible in storage compartments provided for this purpose and near the
axle, as well as secured against slipping.
⚫ Light and other items can be stored in cabinets and storage compart-
ments.
⚫ Always ensure that the doors and flaps on the cabinets and storage
areas are properly secured.
⚫ Use only suitable clamping systems to secure against slipping. Please
check all lashings again before commencing the journey.
Uneven loading has a negative influence on the driving behaviour. In
particular, a rear-heavy load leads to a relief of the front axle due to
the lever effects and thus e.g. to a loss of traction, a worsened stee-
ring response (changed driving behaviour), an overload of the tyres
and thus to an increased risk of tyre bursts. This creates the risk of the
vehicle getting out of control and you endangering yourself and other
road users. An evenly distributed load over the entire vehicle leads to
optimal handling during the journey.
The technically permissible maximum laden mass and the technically
permissible maximum mass on the axle must not be exceeded. Especi-
ally when storing or attaching heavy accessories or accessories that are
heavily loaded at the rear (such as motorcycle rack or bike rack), the
axle loads must be checked and complied with. If you are not sure whe-
ther the laden vehicle complies with the technically permissible maxi-
mum laden mass and the technically permissible maximum mass on the
axle, there is the possibility of weighing/checking the vehicle on public
scales or at individual dealers.
For individual models, a maximum load is specified by the body builder
for cabinets, drawers, storage compartments or other storage spaces.
This is recognisable by means of stickers attached on the spots and
must always be observed. The technically permissible maximum laden
mass and the technically permissible maximum mass on the axle must
not, however, be exceeded under any circumstances. Therefore, please
note that the specified maximum load may not be used in full if this
would cause the technically permissible maximum laden mass or techni-
cally permissible maximum mass on the axle to be exceeded.
You can find more information on correct loading in the sections "Techni-
cally permissible maximum laden mass" (page 22), "Technically permis-
sible maximum mass on the axle (axle load)" (page 29) as well as "Rear
garage / rear storage space" (page 33).
To distribute the load correctly, you will need a scale, a tape measure, a cal-
culator and some time.
Two simple formulas are needed to calculate the effect of the weight of the
load on the axles:
A x G : R = weight on the rear axle
Weight on the rear axle – G = weight on the front axle
Formulas
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
