Hymer BMC-T (2023) handleiding
Handleiding
Je bekijkt pagina 27 van 286
Before the journey 3
B-MC I/T - 01/23-1 - EHG-0016-03EN 27
To do this, proceed as follows:
◼ First only drive the vehicle on to the weighbridge with the front wheels
and have it weighed.
◼ Then drive the vehicle on to the weighbridge with the back wheels and
have it weighed.
The individual values give the current axle loads. These are important for
the correct loading of the vehicle (see section 3.2.3). The sum of these va-
lues is the current weight of the vehicle.
The actual payload is the difference between the technically permissible ma-
ximum laden mass and the weighed vehicle weight.
This can be used to determine the weight that remains for the personal
equipment:
◼ Determine the weight of the passengers and subtract it from the value
for the actual payload.
The result is the weight that is permitted for the actual load of the personal
equipment.
3.2.3 Load securing and load distribution
For safety reasons, never exceed the technically permissible maxi-
mum laden mass.
Distribute the load evenly on the left and right sides of the vehicle.
Distribute the load evenly on both axles. Observe the technically per-
missible maximum mass on the axle specified in the vehicle docu-
ments. Observe the permissible load-carrying capacity of the tyres
(see chapter 13).
Heavy loads behind the rear axle can reduce the load on the front axle
due to the leverage effect ( ). This applies especially to long rear
extensions, if a motorbike is transported on the rear carrier or if there
is a heavy load in the rear storage space. The release of the front axle
negatively affects the driving quality, especially for front-driven vehi-
cles.
Store all objects in such a way that they cannot slip.
Store heavy objects (awning, tin cans, etc.) close to the axles. Low-ly-
ing storage spaces whose doors do not open in the direction of travel
are particularly suited for storing heavy objects.
Stack light objects (laundry) in the roof storage cabinets.
Load the bike rack with bicycles only.
Only load the drawers with a maximum of 15 kg.
Large storage compartments also offer room for heavy objects. The axle
load of the front or rear axle may be exceeded as a result.
However, the individual axles may not be overloaded under any circum-
stances. That is why it is important, at which distance to the axles the load is
stored.
Bekijk gratis de handleiding van Hymer BMC-T (2023), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hymer |
| Model | BMC-T (2023) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31425 MB |
