Humminbird NMEA 2000 handleiding
Handleiding
Je bekijkt pagina 15 van 36
15
Installation - Access Under
6. Align the Sensor’s screw holes over the pilot screw holes and attach
with the #8-19 x 1 1/2" Phillips head screws. Hand tighten only.
NOTE
If the mounting surface is thin or made of a light-weight material, you may need to
add reinforcing material below the mounting surface in order to support the Sensor.
If you use mounting hardware other than the provided screws, the hardware must
be non-ferrous brass or nickel to prevent magnetic interference.
Positioning the Arrow
on the Compass
Attaching the Sensor to
the Mounting Surface
cable routed through the hole
#8-19 x 1 1/2"
mounting screws
Bekijk gratis de handleiding van Humminbird NMEA 2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Humminbird |
| Model | NMEA 2000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3843 MB |
