Handleiding
Je bekijkt pagina 23 van 104
● To turn o the Wi-Fi function, press the button again.
To enter Wi-Fi Protected Setup (WPS) Push Button mode
● Press and hold the Wi-Fi button for at least 3 seconds.
NOTE: For the other tasks listed in the following table, be sure to place the printer in support mode before
using any button combinations.
To enter the printer support mode
● Press and hold the Information button for at least 5 seconds.
All button lights on the printer control panel will light up.
To exit the printer support mode
● Press the Cancel button .
All button lights will turn o if there are no printer errors.
Table 1-9
Common tasks from the printer control panel
Task Instructions (must be in support mode)
Turn Wi-Fi Direct on or o
Press the Wi-Fi button and the Resume button at the
same time.
Switch between Document Copy and Photo Copy modes
Press and hold the Black Copy button and the Color Copy
button
at the same time for 3 seconds.
Restore network defaults
Press the Wi-Fi button and the Cancel button at the same
time for 5 seconds.
Restore factory defaults Restoring the printer to factory defaults will remove all settings and
functions previously set up on the printer.
With the ink access door open, press and hold the Information
button and the Cancel button for at least 3 seconds.
Print reports from the printer control panel
This topic describes the printer reports and how to print.
Print reports from the printer control panel
13
Bekijk gratis de handleiding van HP Smart Tank 7001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Smart Tank 7001 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 15822 MB |
