Handleiding
Je bekijkt pagina 22 van 104
Wi-Fi status, light, and icons
The Wi-Fi light and the wireless status icons on the control panel display work together to indicate the status
of a wireless connection.
Table 1-8 Wi-Fi status, light, and icons
Wi-Fi light Wi-Fi icons Wi-Fi status
O O The printer is not connected to the Wi-Fi network.
To turn on Wi-Fi, press the Wi-Fi button .
To connect the printer to a Wi-Fi network, see Connect your printer
to a Wi-Fi network using HP Smart or Connect your printer to a Wi-Fi
network using Wi-Fi Protected Setup (WPS).
On
On
The printer is connected to a Wi-Fi network.
Blinks
On (signal bars cycle)
The printer is in Wi-Fi setup mode or is trying to connect to a Wi-Fi
network.
A blinking Wi-Fi light indicates that the printer is not connected to
a network or is trying to connect. During setup, it also indicates
the printer is in Wi-Fi setup mode. If the setup mode times out
after some time, you can restart it by restoring the printer network
settings. See Restore original factory defaults and settings.
Blinks
On (signal bars cycle)
The printer is unable to connect to a Wi-Fi network.
To resolve wireless connection issues, see Network and connection
issues.
Blinks
Blinks
The printer is in WPS mode. See Connect your printer to a Wi-Fi
network using Wi-Fi Protected Setup (WPS).
Perform common tasks on the printer control panel
To turn on or o the wireless capability of the printer
When the wireless capability of the printer is turned on, the Wi-Fi button on the printer control panel should
be lit.
● If the blue Wi-Fi light is o, press the Wi-Fi button to turn it on.
12
Chapter 1 Get started
Bekijk gratis de handleiding van HP Smart Tank 7001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Smart Tank 7001 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 15822 MB |
