HP Roam for Business handleiding
Handleiding
Je bekijkt pagina 49 van 52
3. Make sure the Bluetooth Low Energy (BLE) setting is enabled on the General Security tab in the EWS.
4. Make sure Web Services is enabled on the HP Web Services tab in the EWS and that the printer has an
ePrint email address assigned.
5. Make sure the proxy is enabled and the setting is congured correctly on the HP Web Services tab in the
EWS.
6. If the device has recently been reset due to tech support troubleshooting or hardware maintenance, the HP
ePrint email address might have changed. If this is suspected, re-add the device using the HP Roam Web
Portal.
7. Make sure the printer can print using the ePrint email address. To test printing from the WPP Cloud, email a
document such as PDF to the printer’s ePrint email address.
‘45.00.05 Error’ or ‘The given proxy host could not be resolved’
If you receive a 45.00.23 error or a ‘The given proxy host could not be resolved’ message,
the printer might be
congured to use a corporate web proxy that is not available. Congure the printer to use
your corporate web proxy using the printer’s embedded web server.
‘45.00.1C Error’ or ‘Operation timeout’
If you receive a 45.00.1C error or an ‘Operation timeout’ message, the printer might be congured to
use a web proxy but a setting such as the proxy port is incorrect. Make sure the printer proxy settings are correct
in the printer’s embedded web server.
‘45.00.23 Error’ or ‘SSL (secure sockets layer) connect error’
If you receive an 45.00.23 error or SSL (secure sockets layer) connect error, the corporate
network might require a web proxy to access the Internet, but the printer is not currently congured to use it.
Congure the printer to use your corporate web proxy using the printer’s embedded web server.
‘45.00.33 Error’ or ‘SSL certicate or SSH md5 ngerprint not OK’
If you receive a 45.00.33 error or an ‘SSL certificate or SSH md5 fingerprint not OK’
message, the printer might be
congured to use a web proxy, but a security setting is not congured to trust the
site. Enable HP Web Services on the HP Web Services tab in the EWS.
49.wx.yz or 81.wx.yz errors after printing with HP Roam
HP recommends that HP Enterprise-class printers should have a minimum rmware version of FutureSmart 4.9.
Print a conguration page to determine the rmware version installed on the printer.
To check the latest rmware version available for the printer, go to the Latest Firmware Versions.
ENWW ‘45.00.05 Error’ or ‘The given proxy host could not be resolved’ 45
Bekijk gratis de handleiding van HP Roam for Business, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Roam for Business |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6597 MB |
