HP Roam for Business handleiding
Handleiding
Je bekijkt pagina 13 van 52
4 Setup the HP printer
To setup the HP printer to work with HP Roam, follow these steps.
Make sure the printer is compatible
HP Roam is compatible with select HP LaserJet Pro, HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide
Enterprise, and HP PageWide Managed printers.
To make sure the printer is compatible, go to the HP Roam for Business compatibility matrix.
If the printer is not listed, it cannot use HP Roam.
Check the rmware version
For HP Roam functionality, HP Enterprise printers must be running HP FutureSmart rmware version 4.9 or
newer. HP LaserJet Pro printers can skip this step.
To check the latest version of rmware available for the printer, go to Latest rmware versions
Set the Embedded Web Server (EWS) password
To set the EWS password, follow these steps:
NOTE: If you are prompted to log in with administrator credentials after opening the EWS for the rst time, do
not perform this step. An EWS password has already been set. Contact the system administrator.
1. Open the EWS.
a. Open a web browser.
b. Type the printer’s IP address in the URL eld and press Enter.
2. Set the EWS password.
● For Enterprise printers, select the Security tab, and under the Set the Local Administrator Password
section, type and conrm the new password.
● For Pro printers, select the Settings tab, select Security from the left pane, select Password Settings,
and then type and conrm the new password.
3. Click Apply.
ENWW Make sure the printer is compatible 9
Bekijk gratis de handleiding van HP Roam for Business, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | Roam for Business |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6597 MB |
