HP ProDesk 2 SFF G1i E handleiding
Handleiding
Je bekijkt pagina 38 van 124
4. To remove the fan from the heat sink, loosen the four Phillips screws (1) that secure the fan to the
heat sink, and then remove the fan (2).
5. Thoroughly clean the thermal material from the surface on the bottom of the heat sink each time
the heat sink is removed. Replacement thermal material is included with the heat sink and system
board spare part kits.
To replace the heat sink with fan, reverse the removal procedures.
NOTE: Be sure to replace the fan duct. Failure to install the fan duct can cause the computer to
overheat.
When installing the fan onto the heat sink, be sure that the fan cable is at the bottom of the fan.
Heat sink with fan
31
Bekijk gratis de handleiding van HP ProDesk 2 SFF G1i E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | ProDesk 2 SFF G1i E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15941 MB |
