HP ProDesk 2 SFF G1i E handleiding
Handleiding
Je bekijkt pagina 39 van 124
IMPORTANT: Tighten heat sink retaining screws in diagonally opposite pairs (as in an X) to evenly seat
the heat sink on the processor to avoid damage that could require replacing the system board.
Processor
To remove the processor, use these procedures.
Before removing the processor, follow these steps:
Table 4-10 Processor descriptions and part numbers
Description Spare part number
Intel Core i7-14700 processor N74714-003
Intel Core i5-14500 processor N75105-003
Intel Core i5-14400 processor N74716-003
Intel Core i3-14100 processor N75827-003
Intel Core i7-13700 processor N33971-003
Intel Core i5-13500 processor N35169-003
Intel Core i5-13400 processor N33975-003
Intel Core i3-13100 processor N35171-003
Intel 300 processor N75826-003
1. Prepare the computer for disassembly (see Preparation for disassembly on page 19).
2. Remove the access panel (see Access panel on page 19).
3. Remove the fan duct (see Fan duct on page 22).
4. Remove the heat sink (see Heat sink with fan on page 29).
Remove the processor:
1. Pull the locking lever (1) away from the processor, and then rotate the lever (2) to its fully open
position.
2. Raise and rotate the microprocessor retainer (3) to its fully open position.
3. Carefully lift the processor (4) from the socket.
IMPORTANT: Do not handle the pins in the processor socket. These pins are fragile, and handling
them could cause irreparable damage. If pins are damaged, you might have to replace the system
board.
32
Chapter 4 Removal and replacement procedures
Bekijk gratis de handleiding van HP ProDesk 2 SFF G1i E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HP |
| Model | ProDesk 2 SFF G1i E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15941 MB |
