Hotone Ampero II Stomp 10th Anniversary Limited Edition handleiding

Niet gecategoriseerd

Hotone

103 pagina's

PDF beschikbaar

Handleiding

Customizing Your Ampero II Stomp

DetailedHardwareAndUSBAudioRouting

Input Jack

RECLEVEL

1/2

RECLEVEL

3/4

RECLEVEL

5/6

RECLEVEL

7/8

MONITOR

LEVEL

Advanced USB Audio Interface Function Guide

Next we’ll show you some advanced tricks when using your Ampero II Stomp as a USB audio interface.

Example 1: Monitoring Different Outputs

You can use Ampero II Stomp’s output/phones jacks and FX loop send jack for monitoring different signal sources.

In this example, a guitar is connected to unit’s left input, and a bass is connected to the right input. The two instruments will be

recorded simultaneously with different effects:

(1) Connect a pair of headphones to phones jack, connect a pair of monitor amps to FX loop send jack via a Y cable (unbalanced

connection);

(2) Launch a DAW and create two mono audio tracks. Set track 1’s input to USB Audio Input 1, output to USB Audio Output 1/2;

set track 2’s input to USB Audio Input 3, output to USB Audio Output 3/4. Then turn on monitor switches on both tracks;

(3) On your Ampero II Stomp, enter USB Audio menu and set OUTPUT SOURCE to USB OUT 1/2, then set FX SND SOURCE to

USB OUT 3/4;

(4) Enter I/O menu, set both OUTPUT SOURCE and FX SND SOURCE to USB Only;

(5) In the current patch, set the chain A/B to parallel and use mono effects only (e.g. amps and cabs);

(6) Set chain A’s input source to Input L and output to output jacks;

(7) Set chain B’s input source to Input R and output to FX loop send jack;

(8) You’ll hear guitar signal in headphones and bass signal in monitor amps if everything is set. Then record and get individual

guitar and bass tracks.

Example 2: Record Dry/Wet Tracks Simultaneously or Record Dry, Monitor Wet

You can use Ampero II Stomp’s multiple USB audio I/Os for recording multiple dry/wet tracks with DAW.

In this example, all global settings are set to default, factory patch P01-1 Ampero Strikes! is loaded:

(1) Connect a pair of headphones to phones jack and connect a guitar to unit’s input L channel;

(2) Launch a DAW and create two audio tracks. Set track 1’s input to USB Audio Input 1/2, output to USB Audio Output 1/2; set

track 2’s input to USB Audio Input 7, output to USB Audio Output 1/2. Then keep monitor switches off on both tracks;

(3) Still in DAW, set the two tracks can be recorded at the same time;

(4) Record both tracks. Then you get a stereo guitar track with effects and a mono dry guitar track.

If no wet signal is needed, in step (2) you only need to create one audio track and set track input to USB Audio Input 7 (or 7/8

depending on your needs).

FX Loop Return

jack(Relationship

between effects

chains may vary from

patch settings)

Chain A output(Between

slot A6 and output node A)

Chain B output(Between

slot B6 and output node B)

DES IGN I N SPI RAT I ON

Output/phones/

FX Loop send jacks

(depending on

global settings)

USBOutput 1/2

（MainUSBoutput）

USBOutput 3/4

（Assigned by user）

USBOutput 5/6

（Assigned by user）

USBOutput 7/8

（Assigned by user）

USB Input 1/2

USB Input 3/4

USB Input 5/6

USB Input 7/8

Bekijk gratis de handleiding van Hotone Ampero II Stomp 10th Anniversary Limited Edition, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.