Handleiding
Je bekijkt pagina 22 van 56
22
4) Remove the lower hinge bracket and thrust washer. See Fig. 17. Retain thrust washer
for opposite side lower hinge bracket installation. Remove the ller screws from the
opposite side lower hinge bracket holes and mount them into the holes of the removed
lower hinge bracket. NOTICE! Be sure to reuse the bracket screws for mounting the
bracket as the bracket screws are 5×12 and ller screws are 5×10.
5) Secure the lower hinge bracket to the opposite side lower hinge bracket location, then
place the thrust-washer on the lower hinge bracket. See Fig. 18.
6) Remove the screw and washer securing the upper hinge bracket to the spring cartridge.
Remove the 2 screws securing the spring cartridge to the door, then remove the spring
cartridge from the door. See Fig. 19.
Fig. 18
Fig. 19
Filler
Screws
Thrust Washer
Spring Cartridge Screws
Upper Hinge Bracket Screw
Fig. 20
7) Rotate the door 180 degrees, to its new orientation. Remove the nylon bearing and ller
screws. See Fig. 20. NOTICE! Care should be taken not to damage the door. Mount
the nylon bearing and ller screws into the holes left by the spring cartridge in the lower
section of the door. See Fig. 21.
Fig. 17
Fig. 21
Filler
Screws
Thrust Washer
Lower Hinge
Bracket
Upper Hinge Bracket Washer
Upper Hinge Bracket
Spring Cartridge
Door
Filler Screws
Nylon
Bearing
Nylon
Bearing
Hole
Filler Screws
Nylon
Bearing
Formerly Spring
Cartridge Hole
Bekijk gratis de handleiding van Hoshizaki Steelheart F2A-FSN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hoshizaki |
| Model | Steelheart F2A-FSN |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 5596 MB |
