Honeywell X2P handleiding
Handleiding
Je bekijkt pagina 9 van 72
9
7 Install batteries.
Insert two AA alkaline batteries
in the back of the thermostat as
shown.
M39489
8 Attach the thermostat.
Align the thermostat onto the UWP
and firmly snap it into place.
Hold
M39508
9 Turn the power ON.
Turn on the power at the breaker box
or switch that controls the heating/
cooling system.
Breaker box
Switch
M39591
OFF
ON
ON
6 Mount the UWP and close the door.
Mount the UWP using the provided
screws. Install all three screws for a
secure fit on your wall. Close the door
after you’re finished.
Use 3x supplied
#6 1-1/2” screws
M39445
Battery Replacement
The display will alert you when the batteries
are low and must be replaced. Remove the
thermostat by pulling it away from its mount
as seen at right.
Be sure to use fresh AA batteries and insert
them as shown in Step 7. After inserting the
new batteries, align the thermostat with the
mounting plate and push gently until the
thermostat snaps back into place as seen in
Step 8.
Hold
M39516
Bekijk gratis de handleiding van Honeywell X2P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Honeywell |
| Model | X2P |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 6641 MB |
