Honeywell X2P handleiding
Handleiding
Je bekijkt pagina 10 van 72
10
Set Time and Date
Once power is applied for installation, the date
will start flashing.
Time
1. Press MENU on the thermostat
2. Press ↑ or ↓ to go to TIME and press
SELECT
3. Press ↑ or ↓ to choose 12 or 24 hour clock
format and press NEXT
4. Press ↑ or ↓ to adjust the hour and press
NEXT.
Date
1. Press MENU on the thermostat
2. Press ↑ or ↓ to go to DATE and press
SELECT
3. Press ↑ or ↓ to choose YEAR and press
NEXT
4. Press ↑ or ↓ to choose MONTH and press
NEXT
5. Press ↑ or ↓ to choose DATE and press
SAVE and then EXIT
M39509
MODE
Heat
MENU
FAN
Auto
Indoor
Hold
M39510
Hold
System Setup
On initial setup, the thermostat will enter the
ISU menu after setting the time and date. If
entering the ISU menu after initial setup, follow
the steps below:
1. Press and hold the bottom left button and
Up arrow ↑ button for 5 seconds to access
the INSTALLER SETUP
2. The display shows the ISU number on the
left and the ISU setting on the right.
When an ISU number is displayed, press ↑
or ↓ to change the setting for that ISU.
3. After choosing the correct setting for an
ISU, press NEXT to advance to the next
ISU setting.
4. To finish setup, press the SAVE & EXIT
button; this will save your settings and
return to the Home screen.
M39612
Hold
M39506
Hold
Configuration
5.
Press ↑ or ↓ to adjust the minute and press
NEXT
Bekijk gratis de handleiding van Honeywell X2P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Honeywell |
| Model | X2P |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 6641 MB |
