Honeywell X1N handleiding
Handleiding
Je bekijkt pagina 9 van 56
9
4 Connect wires to the UWP.
Refer to the notes you recorded on
the chart during removal. Depress
the tabs to put the wires into the
inner holes of their corresponding
terminals on the UWP (one wire per
terminal) until it is firmly in place.
This wiring is just an example;
yours may vary.
5 Confirm wiring matches snapshot.
Confirm wiring matches terminals
from the photo you took during
removal.
6 Mount the UWP and close the door.
Mount the UWP using the provided
screws. Install all three screws for a
secure fit on your wall. Close the door
after you’re finished.
Use 3x supplied
#6 1-1/2” screws
M39445
7 Install batteries.
Insert two AA alkaline batteries in the back of the thermostat as shown.
M39489
Bekijk gratis de handleiding van Honeywell X1N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Honeywell |
| Model | X1N |
| Categorie | Thermostaat |
| Taal | Nederlands |
| Grootte | 4884 MB |
