Homematic IP HmIP-WTH-B-A handleiding

121 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 29 van 121
29
Start-up
Pairing mode remains activated for
3 minutes.
You can manually start the pairing
mode for another 3 minutes by
pressing the system button (C)
shortly
Figure 6
Your device will automatically appear
in the HomematicIP app.
Your device will automatically ap-
pear in the HomematicIP app.
To confirm, enter the last four di-
gits of the device number (SGTIN)
in your app or scan the QR code.
Therefore, see the sticker supplied
or attached to the device.
Wait until the connection is com-
pleted.
If pairing was successful, the LED
(C) lights up green. The device is
now ready for use.
If the LED lights up red, please try
again.
Select the desired solution for your
device.
Allocate the device to a room and
give the device a name.
6.3 Mounting
Please read this entire section
before starting to mount the de-
vice.
You can operate the wall thermostat
with
the supplied double-sided adhesive
strips or
the supplied screws
to fix it to a wall.
You can also mount the wall thermos-
tat on a flush-mounting box.
6.3.1 Adhesive strip mounting
For mounting the wall thermostat
using the adhesive strips, please pro-
ceed as follows:
Choose a site for installation.
Make sure that the mounting sur-
face is smooth, solid, non-distur-
bed, free of dust, grease and sol-
vents and not too cold to ensure
long-time adherence.
Insert the electronic unit (A) into
the mounting plate (see figure 7).
Make sure that the electronic unit
properly engages into the moun-
ting plate.
Figure 7
click

Bekijk gratis de handleiding van Homematic IP HmIP-WTH-B-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHomematic IP
ModelHmIP-WTH-B-A
CategorieThermostaat
TaalNederlands
Grootte13184 MB