Homematic IP HmIP-WTH-B-A handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121/ 121

Afdrukken

Je bekijkt pagina 28 van 121

28

Start-up

6.1.2 Pairing with other

HomematicIP devices

To connect the wall thermostat with

another HomematicIP device, the

pairing mode of both devices has to be

activated. To do this, please proceed as

follows:

• Open the battery compartment (G)

using a slotted screwdriver to loo-

sen the wall bracket (see figure).

• Remove the insulation strip from

the battery compartment of the

wall thermostat.

• Press and hold down the system

button (C) for at least 4 seconds to

activate the pairing mode. The de-

vice LED (C) starts to flash orange.

Pairing mode remains activated for

3 minutes.

Figure 5

4 s

• Press and hold down the system

button of the device you want to

connect (e.g. the radiator thermo-

stat – basic) for at least 4 seconds

to activate the pairing mode. The

device LED starts to flash orange.

For further information, please re-

fer to the operating manual of the

corresponding device.

• If pairing was successful, the LED

lights up green.

6.2 Pairing to the HomematicIP

Access Point

You can connect the device either

to the HomematicIP Access Point

or the Central Control Unit CCU3.

For detailed information, refer to

the HomematicIP User Guide,

available for download in the

download area of

www.homematic-ip.com).

First set up your HomematicIP

Access Point via the HomematicIP

app to enable operation of other

HomematicIP devices within your

system. For further information,

refer to the operating manual of

the Access Point.

After pairing the wall thermostat

to the HomematicIP Access Point,

the menu of the wall thermostat

will be hidden and settings can be

adjusted only via the

HomematicIP app.

To integrate the wall thermostat into

your system and to enable control via

the HomematicIP app, you must add

the device to your HomematicIP Ac-

cess Point first. To do this, please pro-

ceed as follows:

• Open the HomematicIP app on

your smartphone.

• Select the menu item “Add

device”(see figure 6).

• Open the battery compartment (G)

using a slotted screwdriver to loo-

sen the wall mounting plate

(see figure).

• Remove the insulation strip from

the battery compartment of the

wall thermostat.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121/ 121

Bekijk gratis de handleiding van Homematic IP HmIP-WTH-B-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Thermostaat