Holzmann SSAT2200_230V handleiding
Handleiding
Je bekijkt pagina 21 van 29
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 21
SSAT1000_230V | SSAT2200_230V
the table, the storage compartment and the filter cleaning system. In both cases, corrective
action must be taken before operation is resumed.
• Make sure that you have installed the appropriate filters and suction plates for the material
of the workpiece.
15.2 Handling
Position the workpiece
• Position the workpiece on the suction plate.
• Secure it to the suction plate (1) using the supplied stoppers and
nuts.
• For larger workpieces, fold down the side covers (2).
Switch the machine on and off
Switching on
• Press the green ON button (1).
Switching off
• Press the red OFF button (2).
NOTE: Do not work on the workpiece until the sanding dust suction
table has reached full speed.
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
WARNING
Handling the machine with connected power supply may result in serious injury or
death.
Always disconnect the machine from the power supply before cleaning,
maintenance or repair work and secure it against unintentional reconnection.
16.1 Cleaning
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe
operation.
NOTE
Incorrect cleaning products can attack the finish of the machine. Do not use any
solvents, nitro thinners or other cleaning products that could damage the machine's
finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
• Remove chips and dirt particles from the machine after each use with a brush and vacuum
cleaner. Do not blow out the machine with compressed air!
• Check and clean the filter, motor and fan blades regularly.
• Prepare the surfaces and lubricate the bare machine parts with an acid-free lubricating oil
(e.g. WD40 rust inhibitor).
16.2 Maintenance
The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects
that could affect your safety must be repaired immediately!
• Before each operation, check the perfect condition of the safety devices.
• Regularly check the perfect and legible condition of the warning and safety labels of the
machine.
• Use only proper and suitable tools.
• Use only original spare parts recommended by the manufacturer.
Maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The
following intervals apply when the machine is used within the technical limits:
Interval
Components
Action
Before usage
• Screw connections
• Check, tighten if necessary.
• Cable and switching unit • Check for damage, repair if necessary.
After usage
• Machine
• Drawer
• Filter
• Clean, especially the suction plates and the
suction head as well as the fan blades and motor.
• Empty.
• Check and clean, replace if necessary.
Once a week
• Squirrel cage
• Check and clean.
Bekijk gratis de handleiding van Holzmann SSAT2200_230V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | SSAT2200_230V |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6744 MB |