Holzmann SSAT2200_230V handleiding
Handleiding
Je bekijkt pagina 22 van 29

TROUBLESHOOTING
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 22
SSAT1000_230V | SSAT2200_230V
Filter
• Disconnect the machine from the power supply.
• Remove the suction plates from the machine frame.
• Remove the filter and insert the new filter at the blower housing (1).
• Place suction plates in the machine frame (1).
• Establish power supply.
NOTE: Only use filters that comply with the specifications, see chapter
Technical data.
16.3 Storage
Store the cleaned machine in a dry, frost-proof and lockable place when not in use. Disconnect the
machine from the power supply. Make sure that unauthorised persons and especially children do
not have access to the machine.
NOTE
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
16.4 Disposal
Observe the national waste disposal regulations. Never dispose of the machine,
machine components or operating equipment in the residual waste. If necessary,
contact your local authorities for information regarding available disposal options.
If you purchase a new machine or equivalent equipment from your specialist dealer, p22-he
is obliged in certain countries to dispose of your old machine properly.
TROUBLESHOOTING
WARNING
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
Disconnect the machine from the power supply before starting work to
eliminate defects!
Many possible sources of error can be eliminated in advance if the machine is properly connected
to the power supply.
If you are unable to carry out the necessary repairs properly and/or do not have the required
training, always consult a specialist to solve the problem.
Trouble
Possible cause
Solution
Machine does not
run
• Switch defective
• Repairing switch
• Power supply switched off
• Check power supply
• Fuse defective
• Change fuse
• Contactor defective
• Repair or replace contactor
Dust leakage • Leaking or blocked connections • Check connections, remove blockages
Loud noise in the
fan wheel housing
• Large part sucked in
• Switch off the machine, disconnect from the
power supply and remove the part
• Loose fan wheel • Fixing the fan wheel
Bekijk gratis de handleiding van Holzmann SSAT2200_230V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Holzmann |
Model | SSAT2200_230V |
Categorie | Stofzuiger |
Taal | Nederlands |
Grootte | 6744 MB |