Holzmann SSAT2200_230V handleiding
Handleiding
Je bekijkt pagina 20 van 29
OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 20
SSAT1000_230V | SSAT2200_230V
Suction plate (if not yet fitted)
• Position the suction plates (5) on the machine
• Insert rubber (6) into the suction plates
- SSAT1000_230V: 5 suction plates / 90 rubber
- SSAT2200_230V: 11 suction plates / 198 rubber
Side cover
• Attach side covers (7) using 2 bolts (8) and one screw (9)
each.
Handle
• Fix the handle (10) to the cover with 2 screws each.
Dust drawer (if not yet fitted)
• Position the dust drawer in the compartments
provided (11).
- SSAT1000_230V: 1 handle / 1 dust drawer
- SSAT2200_230V: 2 handles / 2 dust drawers
14.3 Electrical connection
WARNING
Dangerous electrical voltage!
Risk of injury due to dangerous electrical voltage!
The machine may only be connected to the power supply and the associated
checks carried out by a qualified electrician or under the instruction and
supervision of a qualified electrician!
• Check, whether the neutral connection (if existing) and the protective grounding function
properly.
• Check, whether the supply voltage and the frequency correspond to the specifications of
the machine.
NOTE
Deviation of the supply voltage and frequency!
A deviation from the value of the supply voltage of ±5 % is permissible.
A short-circuit fuse must be provided in the power supply system of the machine!
• Use a supply cable that fulfils the electrical requirements (e.g. H07RN, H05RN) and take the
required cross-section of the supply cable from a current carrying capacity table. Pay
attention to the measures for protection against mechanical damage.
• Make sure that the power supply is protected by a residual current circuit breaker.
• Connect the machine only to a properly grounded outlet.
• When using an extension cable, make sure that the dimension matches the connected
load of the machine. The connection power can be found in the technical data, the
correlation of cable cross-section and cable lengths can be found in the technical literature
or obtain information from a specialist electrician.
• A damaged cable must be replaced immediately.
NOTE
Operation is only permitted with residual current device (RCD) with maximum
residual current of 30 mA.
OPERATION
Only operate the machine when it is in a perfect condition. Before each operation, a visual
inspection of the machine must be carried out. Safety devices and operating elements must be
checked carefully. Check screw connections for damage and tight fit.
15.1 Operating instructions
• Only work with the woodworking machine when the suction system has reached full
speed!
• Position the workpiece securely on the table.
• Take precautions to protect tools and cables from damage.
• Switch off the machine immediately if you hear unpleasant noises such as squeaking,
hissing, rattling, rumbling or vibrating. Noises that imply restricted air circulation can affect
Bekijk gratis de handleiding van Holzmann SSAT2200_230V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | SSAT2200_230V |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6744 MB |