Holzmann MSM75 handleiding
Handleiding
Je bekijkt pagina 19 van 34
SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
19
MSM75_3IN1_230V | MSM75_3IN1_400V
• Select a level, vibration-free surface as the installation area.
• Anchor the machine to the ground to prevent it from lifting off or falling over when
sanding.
• Ensure sufficient space around the machine.
• Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
• Ensure a clean working environment.
• Avoid an abnormal posture. Ensure that you are standing securely and keep your balance
at all times.
• Keep the area around the machine free of obstacles (e.g. dust, chips, cut-off workpiece
parts, etc.).
• Only use tools that are in perfect condition and free of cracks and other defects (e.g.
deformations).
• Remove tool keys and other setting tools before switching on the machine.
• Check the machine's connections for strength before each use.
• Never leave the running machine unattended. Switch off the machine before leaving the
working area and secure it against unintentional or unauthorized restarting.
• The machine may only be operated, maintained or repaired by persons who are familiar
and who have been informed about the dangers arising from this work.
• Ensure that unauthorized persons keep a safety distance from the machine and keep
children away from the machine.
• Always work with care and the necessary caution and never use excessive force.
• Do not overload the machine.
• Hide long hair under hair protection.
• Wear close fitting protective work clothing and suitable protective equipment (eye
protection, dust mask, ear protection, safety-shoes, work gloves only when handling tools).
• Never wear loose jewellery, loose clothing or accessories (e.g. tie, scarf).
• Do not work on the machine if you are tired, not concentrated or under the influence of
medication, alcohol or drugs!
• Connect the machine to a suitable dust collection system.
• Do not use the machine in areas where vapours of paints, solvents or flammable liquids
represent a potential danger (danger of fire or explosion!).
• Shut down the machine and disconnect it from the power supply, before adjustment,
changeover, cleaning, maintenance or repair work, etc. Before starting work on the
machine, wait until all tools or machine parts have come to a complete standstill and
secure the machine against unintentional restart.
12.5 Electrical safety
• Make sure that the machine is grounded.
• Only use suitable extension cables.
• A damaged or tangled cable increases the risk of electric shock. Handle the cable with care.
Never use the cable to carry, pull or disconnect the machine. Keep the cable away from
heat, oil, sharp edges or moving parts.
• Proper plugs and outlets reduce the risk of electric shock.
• Water entry into the machine increases the risk of electric shock. Do not expose the
machine to rain or moisture.
• The machine may only be used if the power supply is protected by a residual current circuit
breaker.
• Before connecting the machine always make sure that the main switch is switched off.
• Use the machine only when the ON-OFF switch is in good working order.
12.6 Special safety instructions for this machine
• Do not reach into the running machine. Keep hands and other objects away from moving
machine parts.
• Do not brake the sanding belt with your hand or other objects.
• Use the work rest.
• Keep the ventilation slots on the housing clear to prevent the motor from overheating.
12.7 Hazard warnings
Residual risks
Despite intended use, certain residual risk factors remain.
• Risk of injury to hands/fingers from moving parts during operation.
• Risk of injury to hands/fingers from sharp edges if the workpiece moves with the sanding
movement.
• Risk of injury to hands/fingers from the moving sanding belt during operation.
• Risk of injury due to breakage or tearing of the moving sanding belt.
• Risk of eye injury from flying parts, even when wearing safety goggles.
• Risk of cutting hands/fingers on the cutting edges of the workpiece.
• Risk of injury due to the machine tipping over.
• Risk of injury to the respiratory tract due to sanding dust if a dust mask is not used.
Hazardous situations
Due to the structure and construction of the machine, hazardous situations may occur which are
identified in this manual as follows:
DANGER
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Bekijk gratis de handleiding van Holzmann MSM75, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | MSM75 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8494 MB |
