Holzmann MSM75 handleiding
Handleiding
Je bekijkt pagina 18 van 34
SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
18
MSM75_3IN1_230V | MSM75_3IN1_400V
SAFETY
This section contains information and important notes on the safe commissioning and handling of
the machine.
For your safety, read this manual carefully before commissioning. This will enable you
to handle the machine safely and thus prevent misunderstandings as well as
personal injury and damage to property. Pay special attention to the symbols and
pictograms used on the machine as well as the safety information and danger
warnings!
12.1 Intended use of the machine
The machine is designed exclusively for the following activities:
For sanding and deburring pipe ends and for surface sanding and polishing workpieces made of
metal or similar materials that are not hazardous to health, flammable or explosive, within the
technical limits.
NOTE
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity
max. 70 %
Temperature (operation)
+5 °C to +40 °C
Temperature (storage, transport)
-25 °C to +55 °C
Prohibited applications / Dangerous misuse
• Operating the machine outdoors.
• Operating the machine without adequate physical and mental fitness.
• Operating the machine without knowledge of the manual.
• Modifying the machine design.
• Operating the machine in a potentially explosive environment.
• Operating the machine in the vicinity of flammable liquids, vapors or gases.
• Operating the machine outside the technical limits specified in this manual.
• Processing flammable and explosive materials (e.g. pure aluminium, magnesium) without
additional measures.
• Removing of the safety markings attached to the machine.
• Modifying, circumventing or disabling the safety devices of the machine.
• Machining of materials with dimensions outside the limits specified in this manual.
• Cleaning the machine with water, neither with the power switched on or with the power
switched off.
The non-intended use or the disregard of the explanations and instructions described in this
manual will result in the expiration of all warranty claims and compensation claims for damages
against HOLZMANN MASCHINEN GmbH.
12.2 User requirements
The machine is designed to be operated by one person. The prerequisites for operating the
machine are physical and mental fitness as well as knowledge and understanding of the operating
instructions. Persons who, due to their physical, sensory or mental capabilities, inexperience or lack
of knowledge, are unable to operate the machine safely must not use the machine without
supervision or instruction by a responsible person.
Please note that locally applicable laws and regulations determine the minimum age of the
operator and may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the guidance and supervision of a qualified electrician.
Put on your personal protective equipment before working on the machine.
12.3 Safety devices
The machine is equipped with the following safety devices:
• A self-locking emergency stop button (1) to stop
dangerous movements at any time.
• Protective shield (2)
• Cover for sanding surface (3)
• Protective cover (4)
•
Rear cover (5)
12.4 General safety instructions
To avoid malfunctions, damage and health impairments when working with the machine, the
following points must be observed in addition to the general rules for safe working:
• Check the machine for completeness and function before starting. Only use the machine if
the separating and other non-separating protective devices required for machining have
are fitted.
• Make sure that the guards are in good working order and properly maintained.
Bekijk gratis de handleiding van Holzmann MSM75, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | MSM75 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8494 MB |
