Holzmann EISA160-MINI handleiding
Handleiding
Je bekijkt pagina 24 van 35
TRANSPORT
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 24
EISA160MINI
WARNING
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
CAUTION
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
NOTE
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and appropriate technical
suitability/training are and will remain the most important safety factor for error-free operation of
the machine. Safe working primarily depends on you!
TRANSPORT
For proper transport, follow the instructions and information on the transport packaging
regarding centre of gravity, attachment points, weight, means of transport to be used and
prescribed transport position, etc.
Transport the product in its packaging to the place of installation. When lifting, carrying and
depositing the load, make sure that you are in the correct posture:
• Lifting, Depositing Ensure stability when lifting / setting down (legs hip width). Lift / lower
load with bent knees and straight back (like weightlifter). Do not lift / lower the load jerkily.
• Carrying Carry load with both hands as close to body as possible. Carry load with straight
back.
Always secure the assembled product during transport in the transport position to prevent
damage to the product.
• Do not lift or transport operational devices
• Switch off devices before transport or lifting
• Before transporting the device detach the shielding gas cylinder
ASSEMBLY
14.1 Preparatory activities
14.1.1 Checking delivery content
Always note visible transport damage on the delivery note and check the machine immediately
after unpacking for transport damage or missing or damaged parts. Report any damage to the
machine or missing parts immediately to your retailer or freight forwarder.
14.1.2 Site requirements
Place the machine on a level (max. permissible tilt angle ≤10°) solid surface. The space required by
the machine and the required load-bearing capacity of the subfloor result from the technical data
(dimensions, weight) of your machine. When designing the working area around the machine,
observe the local safety regulations. When dimensioning the required space, ensure there is an all-
round clearance of 0.5 m to ensure that cooling air can flow in and out freely and take into account
that the operation of the machine must be possible without restrictions at all times. The selected
installation location must ensure a suitable connection to the power supply.
Use spot extraction and room extraction. Ensure sufficient fresh air supply - ventilation rate of at
least 20 m³ / hour.
Bekijk gratis de handleiding van Holzmann EISA160-MINI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | EISA160-MINI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6917 MB |
