Holzmann ED750FDQ handleiding
Handleiding
Je bekijkt pagina 43 van 95
ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 43
ED750FDQ
17 ASSEMBLY
17.1 Preparatory activities
17.1.1 Checking delivery content
Always note visible transport damage on the delivery note and check the machine immediately
after unpacking for transport damage or missing or damaged parts. Report any damage to the
machine or missing parts immediately to your retailer or freight forwarder.
17.1.2 Cleaning and lubrication
Before you install and commission the machine at the intended location, carefully remove the
anti-corrosion protection and grease residues.
Under no circumstances should you use nitro thinner or other cleaning agents that could attack
the machine's paint.
Oil bare machine parts (e.g. machine bed, tailstock sleeve, feed spindle) with an acid-free
lubricating oil.
17.1.3 Site requirements
Place the lathe on a solid surface. A concrete floor is the best foundation for the machine. If
necessary, use an underframe.
The space required by the machine and the required load-bearing capacity of the subfloor result
from the technical data (dimensions, weight) of your machine. When designing the working area
around the machine, observe the local safety regulations. When dimensioning the required space,
take into account that the operation, maintenance and repair of the machine must be possible
without restrictions at all times.
The selected installation location must ensure a suitable connection to the electrical mains (230 V
/ 50 Hz) with appropriate fuse (16 A).
17.1.4 Anchorless assembly
NOTICE
The use of machine feet (not supplied) facilitates levelling of the machine and
reduces vibrations.
After the machine has been brought into the desired position at the intended installation location,
it must be levelled in the longitudinal and transverse axes using the pressure screws.
A … Headstock;
B… Precision balance;
C … tailstock;
D … saddle & cross slide
E … bed slideway
Bekijk gratis de handleiding van Holzmann ED750FDQ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | ED750FDQ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33097 MB |
