Holzmann ED750FDQ handleiding
Handleiding
Je bekijkt pagina 42 van 95
TRANSPORT
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 42
ED750FDQ
CA U T I O N
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
NO T I C E
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and appropriate technical
suitability/training are and will remain the most important safety factor for error-free operation of
the machine. Safe working primarily depends on you!
16 TRANSPORT
W A R N I NG
Damaged or insufficiently strong hoists and load slings can result in serious injury or
even death. Before use, therefore, check hoists and load slings for adequate load-
bearing capacity and perfect condition. Secure the loads carefully. Never stand under
suspended loads!
To ensure proper transport, observe the instructions and information on the transport packaging
regarding centre of gravity, attachment points, weight, means of transport to be used and the
prescribed transport position, etc.
Transport the machine in its packaging to the place of installation. To manoeuvre the machine in
the packaging, a pallet truck or forklift truck with the appropriate lifting force can be used, for
example. Ensure that the selected lifting equipment (crane, forklift, pallet truck, load sling, etc.)
is in perfect condition. Lifting and transporting the machine may only be carried out by qualified
personnel with appropriate training for the lifting equipment used.
NO T I C E
Avoid using sling chains as there is a risk of damaging the feed screw or the lead
screw. Make sure that the lead screw, feed screw and selector shaft of the machine
are not touched by the lifting slings when lifting. Never lift the machine by the
spindle!
To position the machine at the installation location, proceed as follows:
1. Lift the machine with a suitable conveyor
(e.g. crane or forklift).
Note: Before lifting, check that the tailstock is
clamped. Ensure that the load stop is balanced. If
necessary, change the position of the bed carriage
and/or tailstock to obtain a balanced load stop.
Bekijk gratis de handleiding van Holzmann ED750FDQ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Holzmann |
| Model | ED750FDQ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33097 MB |
