Hobart PW10N-ADV handleiding
Handleiding
Je bekijkt pagina 22 van 116
– 22 –
CLEANING
The machine must be thoroughly cleaned at the end of each working shift or at least daily.
Never use steel wool to clean warewasher surfaces. Use only products formulated to be
safe on stainless steel.
1. Press the Power button for 5 seconds (until progress bar is complete). The machine
will automatically drain.
2. Once the display has powered off, open the machine door.
3. Thoroughlycleanseandushthedishwasherinterior.Removeremainingsoilwitha
soft cloth or brush and mild cleanser. Rinse again.
4. Remove and empty the scrap basket and strainer. Wash and rinse thoroughly.
5. Clean tank bottom. Do not allow food soil to accumulate on the tank bottom or to enter
the drain.
6. Remove standpipe. Wash and rinse standpipe inside and out.
7. Ensure upper and lower wash and rinse arms (Figs. 21, 22) rotate freely and are
free of any obstructions. If not, remove arms and clear out any obstructions. Refer to
Maintenance, page 30. NOTE: All PW20n models have two sets of upper and lower
wash and rinse arms.
Do not bang wash arms or rinse arms to clean.
8. Press and hold manual drain button (page 20, Fig. 19) for 5 seconds or until progress
bar is complete to drain remaining water in the tank.
9. Replace all removed parts. Leave machine door open to allow interior to air out and dry.
Fig. 22
Fig. 21
RINSE ARM
WASH ARM
HAND KNOB
RINSE ARM
WASH ARM
HAND KNOB
Bekijk gratis de handleiding van Hobart PW10N-ADV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | PW10N-ADV |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 27655 MB |
