Hobart LXNR-2 handleiding
Handleiding
Je bekijkt pagina 28 van 32
– 28 –
Error
No.
Text On Screen Error Description Troubleshooting
033 Fill valve error.
active for more than the
Ensure incoming water supply is turned on
pressure is 15 - 65 psi. Press the ENTER
button to clear the error. If the error persists,
turn water supply off and contact Hobart
Service.
035 Ensure tank strainer is
locked in place.
The internal scrap basket
is not inserted, or it is not in
the locked position.
Ensure scrap basket is properly installed
and in the locked position. The arrow on the
scrap basket should line up with the arrow
on the strainer pan. If installed properly, the
error will clear automatically. (Refer to
page 17, Fig. 5.)
038 Incoming power to machine
is too high. Machine has
powered down.
The incoming voltage is
higher than the maximum
required machine voltage.
The incoming voltage must be at or below
the required machine voltage (see machine
data plate). Turn circuit breaker supply off
and ensure unit is connected with proper
voltage supply. Press Enter to clear error.
039 Fill cycle interrupted. Close
door.
Door is opened during the Close the door and ensure door is fully
persists, contact Hobart Service.
049 Communication between
the controls has been
interrupted.
Interruption of communica-
tion between control board
and touchscreen display.
Communication between the controls should
be automatically restored. If the problem
persists, contact Hobart Service.
052 Drain hose is clogged. Wash tank water level is
above the upper limit.
Ensure power to machine is off and wash
water has cooled. Verify bottom of wash
tank is free of debris. Clean the drain hose
and drain the machine. Ensure drain hose is
not kinked and installed properly. If error re-
mains on screen, press and hold the power
button for 5 seconds to clear the error. Ma-
chine will drain and power down.
057
will begin when water is
replenished.
Wash tank water level is
low at start of wash cycle.
-
played. Once proper water level is reached,
wash cycle will begin.
059 Cloud connection not
available.
WiFi is connected, data
cannot be sent to the cloud.
Tap on HELP in Smart Connect app and
refer to the troubleshooting in the FAQ's for
guidance.
070 Minimum wash tempera-
ture not reached.
The wash temperature did
not reach the minimum set
point requirement.
Press the ENTER button to clear the error. If
the error persists, contact Hobart Service.
071 Minimum rinse temperature
not reached.
The rinse temperature did
not reach the minimum set
point requirement.
Press the ENTER button to clear the error. If
the error persists, contact Hobart Service.
Bekijk gratis de handleiding van Hobart LXNR-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hobart |
| Model | LXNR-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4923 MB |
