HK Audio CONTOUR X CX 210LT handleiding
Handleiding
Je bekijkt pagina 9 van 32
CONTOUR X 210LT
9
Pick points and fl ying the CONTOUR X
210 LT in a horizontal array
1. Only move the speakers with the assistance of another person, to avoid
possible injuries
2. Place the speakers connected to form a horizontal array on a fl at surface
(for clustering, see instructions on connecting the speakers to form a
horizontal array)
3. The CONTOUR X 210 LT has a pick point for attaching a shackle in the
centre of the upper ICF, as well as on the side edge of the upper ICF
4. The pick point in the centre of the ICF must be used to fl y a single speak-
er or a horizontal array of three
5. To fl y a horizontal array of two and a horizontal array of four, the pick
point between the connected speakers must be used
6. Connect the speakers to the pick point provided with a shackle, insert the
threaded bolt and secure by tightening the nut. Secure the connection
with the spring pin (split pin) to further secure it
7. Raise the horizontal array to working height (approx. 1.50m) using the
chain hoist
8. Slide the QRPs on the underside (lower ICF) for securing the fl aps into
the openings provided in the fl aps on both sides of the respective speak-
ers until they click into place with an audible click
9. Pull the horizontal array to the desired height
Dismantling the fl own CONTOUR X 210 LT
To dismantle the fl own CONTOUR X 210 LT, the above steps must be carried
out in reverse order.
Flying the speakers at the respective pick points without a
fl ight rail results in the following angles:
Flying a single speaker results in a tilt angle of 6°.
Flying a horizontal array of two results in a tilt angle of 8°.
Flying a horizontal array of three results in a tilt angle of 2°
Flying a horizontal array of four results in a tilt angle of 1°
Heads Up: Suitable secondary securing devices (safeties) must always
be used. A securing element (safety) must be installed in such a way that it
does not allow any fall distance. If a fall distance is unavoidable, it must be
minimised as far as possible. A secondary securing device can only be
omitted if all components in the load line are intrinsically safe, can only be
released with tools and are secured against self-release.
Heads Up: If the individual speaker or the cluster is raised or lowered,
it is prohibited for people to stand underneath it!
• English • Deutsch
Bekijk gratis de handleiding van HK Audio CONTOUR X CX 210LT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HK Audio |
| Model | CONTOUR X CX 210LT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6343 MB |
