HK Audio CONTOUR X CX 210LT handleiding
Handleiding
Je bekijkt pagina 8 van 32
CONTOUR X 210LT
8
Rigging instructions
Connecting the CONTOUR X 210 LT to form a horizontal array
Array
1. Only move the speakers with the assistance of another person, to avoid
possible injuries
2. Place the speaker on a flat surface when stationary
3. Place the speaker on the rubberised feet on the right-hand side to access
the lower ICF
4. Release the QRP for securing the flap in the park position
5. Slide the flap out of the park position and secure using QRP.
At the bottom, make sure the QRP is in the park position.
6 Release the QRP for securing the flap in the park position on the upper
ICF
7. Carefully place the speaker in a safe position
8. Repeat this procedure with the other speakers to be connected
9. Slide the speakers to be connected together on a flat surface. Posi-
tioning is achieved by inserting the extended flaps into the insertion
opening of the ICF.
10. Slide the flap from the park position into the insertion opening of the
speaker to be connected
11. Slide the QRP for securing the flap into the opening provided until it
clicks into place with an audible click
12. Slide the second QRP of the insertion opening for securing the flap into
the opening provided in the flap until it clicks into place with an audible
click.
Bekijk gratis de handleiding van HK Audio CONTOUR X CX 210LT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HK Audio |
| Model | CONTOUR X CX 210LT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6343 MB |
