Handleiding
Je bekijkt pagina 10 van 35
10
determine to connect with the filter inlet
or outlet.)
Fourth, mount the filter holder onto the
wall by using a screwdriver and attach
the water filter.
Note!
The water lines must be fully
inserted into the filter to prevent water
leaking.
The line length should be less than
5m. If the water line is too long(>5m),
the ice and cold water content may be
affected due to insufficient water
pressure.
Cut the water line as required length
and avoid overbending the water lines.
It is recommended to have a suitably
qualified person to install the product.
Warning!
The water filter must be held upright
as shown in the figure above. It is
critical to connect the water inlet and
outlet hoses on the filter correctly.
Never mount the filter onto the
refrigerator. Coolant pipes might be
pierced.
Installing the water lines of the filter
To install the water lines of the filter,
follow the instructions of installing steps
below that referring to the figures
supplied.
First, take the 2 clips out, then pull out
the 2 stopper of the water filter.
Second, fully insert the water lines into
the Inlet and Outlet of the water filter.
Third, insert the 2 clips in the proper
position as the figure shown below, and
confirm that each clip holds the water
line firmly.
Bekijk gratis de handleiding van Hisense RS9P628GPFE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | RS9P628GPFE |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5912 MB |
