Handleiding
Je bekijkt pagina 9 van 35
9
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may need
to be adjusted. Please use a suitable
spanner.
To allow the doors to self-close, tilt
back the top backwards at about 15mm
or 0.5° by turning the adjustable feet.
Whenever you want to move the
appliance, remember to turn the feet
back up, so that the appliance can roll
freely. Reinstall the appliance when
relocating.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height as
the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not castors,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage your
floor and the rollers.
Installing the water lines and filter
Installing the water filter
To fit the water filter, follow the installing
steps below.
First, take out the water filter and water
lines from the fridge room.
Second, determine the location to
mount the external filter. (Note: The
water filter should be mount on the wall
where it is convenient to be replaced,
and do not mount on the wall behind the
refrigerator.)
Third, determine the distance between
the filter and the tap, and the distance
from the filter to the fridge. Prepare lines
as required lengths. (Cut the proper
lengths of water lines which you
Bekijk gratis de handleiding van Hisense RS9P628GPFE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | RS9P628GPFE |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5912 MB |
