Handleiding
Je bekijkt pagina 84 van 288
Troubleshooting
• If you choose TV as the input source, adjust the direction and position of the antenna, reset or fine tune the
channel. (only for the models with tuners).
• When connecting the TV to external devices, leave some space between the external devices and the TV.
Note:
• Picture distortion caused by weak or poor signal reception is not a TV malfunction.
• The compressed video may cause picture distortion, especially for the fast moving pictures from sports
programs and action movies.
There are dots, horizontal or vertical lines on the screen.
• Switch to other channels or contents to check if the picture is normal.
• Change the output resolution of your external device. When the TV is not compatible with the output
resolution, dots or lines may occur.
• Check if the TV is located in a humid space for a long time. It is suggested to use the TV in a relatively dry
environment.
• Some electrical appliances may affect the TV. For example, microwaves used close to the TV may cause
noise on analog and digital channels. If you turn off the appliance and the interference disappears, it
proves that the appliance does affect the picture performance. Please move it further away from your TV.
The brightness cannot be adjusted.
•
Check Light Sensor settings at > Settings > Display & Sound > Intelligent Settings > Automatic
Light Sensor. If Automatic Light Sensor is on, remove the objects that may block the TV light sensor.
•
Turn on Automatic Light Sensor. Press button on your remote control and select Settings > Display
& Sound > Intelligent Settings > Light Sensor Shift to adjust the setting.
Note:
• The light sensor feature settings may not be applicable in some models/countries/regions.
Sound Issues
Please check the items below.
• There is a delay between the picture and sound.
• Sound is distorted or cuts out momentarily.
• Volume cannot be changed or it changes on its own.
There is a delay between the picture and sound.
•
Press button on your remote control and select Settings > Display & Sound > Sound > Digital
Audio Output > Digital Audio Delay. Set the value to 0.
•
Press button on your remote control and select Settings > Display & Sound > Sound > TV Sound
Effect > Lip Sync. Adjust the value as you desire.
• Check the signal information. If the signal is weak or poor, a delay between the picture and sound may
occur but it is not a malfunction.
Note:
80
Bekijk gratis de handleiding van Hisense 100U8QG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hisense |
| Model | 100U8QG |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 24897 MB |
