Hinkley Lighting 992002FBN handleiding

Handleiding

123456789101112131415/ 15

Afdrukken

Je bekijkt pagina 4 van 15

Fig. 11

Fig. 12

Fig. 13

. Slip the coupling cover, mounting screw cover and

canopy onto the downrod in the order shown. (Fig. 11)

7. Thread the Slope Adaptor Hanger Ball onto the

downrod until the Safety Pin center hole on the Ball

aligns with the safety pin hole in the downrod. Insert

the safety pin (careful not to damage the lead wires.)

(Fig. 11)

NOTE: The Hanger Ball can be installed in ONLY one

direction. The "cutout" should be toward the

"Lower" end of the ceiling slope. (Fig. 12)

8. Now lift the motor assembly into position with the

hanger ball in the position (shown in Fig. 13) and

place the pivot pens on the hanger ball into the pivot

groves on the hanger bracket. (Fig 12)

Next, lower the hanger ball until the pivot pens rest in

the bottom of the pivot groves. (Fig 12)

9. Make sure the Safety Pen installed in Fig 12 is

installed but NOT tightened. (Fig 13)

DO NOT TIGHTEN AT THIS TIME

Slope adaptor

hanger ball

Safety Pin

Downrod

Canopy

Canopy cover

Coupling cover

Hanger

bracket

Hanger

bracket

3/16” X 65 mm

Safety pin

123456789101112131415/ 15

Bekijk gratis de handleiding van Hinkley Lighting 992002FBN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Verlichting