Helix AMPLIFY 201 DIRECT handleiding
Handleiding
Je bekijkt pagina 19 van 24
19
en
Conguration examples
IMPORTANT: The crossover frequencies for the high- and lowpass must be set in the preconnected
DSP / DSP amplier.
Mono
Subwoofer with one voice coil (single voice coil)
Maximum output power of this conguration:
1 x 4 Ohms: 250 Watts RMS
1 x 2 Ohms: 450 Watts RMS
1 x 1 Ohm: 750 Watts RMS
Parallel operation
Two subwoofers with one voice coil (single voice coil)
or one subwoofer with dual voice coil are connected in
parallel.
Note: The parallel connection of two voice coils will
result in halving the impedance!
Maximum output power of this conguration:
Two subwoofers with 1 x 4 Ohms correspond to a total
impedance of 2 Ohms: 450 Watts RMS
One subwoofer with 2 x 4 Ohms also corresponds to a
total impedance of 2 Ohms: 450 Watts RMS
Two subwoofers with 1 x 2 Ohms correspond to a total
impedance of 1 Ohm: 750 Watts RMS
One subwoofer with 2 x 2 Ohms also corresponds to a
total impedance of 1 Ohm: 750 Watts RMS
Note: The parallel connection of 1 Ohm voice coils will
result in shutdown of the amplier.
Two subwoofers with
a single voice coil
One subwoofer with
a dual voice coil
Bekijk gratis de handleiding van Helix AMPLIFY 201 DIRECT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Helix |
| Model | AMPLIFY 201 DIRECT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2483 MB |
