Helix AMPLIFY 201 DIRECT handleiding
Handleiding
Je bekijkt pagina 18 van 24
18
1. Clipping LED
Normally, the Clipping LED (page 14, point 5)
is o and only lights up if one of the line inputs
is overdriven.
On (red): One of the analog signal inputs is
overdriven. Reduce the input sensitivity using
the Gain control until the LED goes out. In
-
structions on how to reduce the input sensitivity
are described on page 16, point 4.
2. Status LED
The Status LED
(page 14, point 7)
indicates
the operating mode of the amplier.
Green: The amplier is ready for operation.
Red: Protection Mode active. A malfunction
has occurred that may have dierent root
causes. The amplier is equipped with protec-
tion circuits against over- and undervoltage
as well as overheating. Please check for con-
necting failures such as short-circuits or other
incorrect connections. If the amplier is over-
heated, the internal temperature protection
will turn o the signal output until it reaches a
safe temperature level again. If the amplier
does not turn on, it is defective and needs to
be sent to your local authorized HELIX dealer
for repair service.
Additional functions
Bekijk gratis de handleiding van Helix AMPLIFY 201 DIRECT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Helix |
| Model | AMPLIFY 201 DIRECT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2483 MB |
