Handleiding
Je bekijkt pagina 7 van 65
www.heinner.com
6
Adjusting the direction of elbow
After loosening the elbow, adjust the elbow interface to the required direction as required, and keep the
hexagonal head of the elbow motionless with a wrench. Use a 9±1N.m torque wrench to tighten the black
bolt of the gas inlet pipe assembly. Ensure that the torque of the wrench is within the required range to
prevent elbow breakage or damage caused by excessive force.
After the installation is tightened, check whether the parts are in good condition and test the air tightness
to ensure the tightness of the installation. The installer is responsible for the results of the process.
Installing the gas hob
• Do not use too much force when tightening; Otherwise, it will cause elbow fracture or rubber ring
deformation and leakage. Note that the torque wrench must be used to tighten with a torque of
10N.m. The maximum torque cannot exceed 20N.m.
Gas connection
The gas connection must be located in position where the stop tap is accessible.
The end of the inlet connection point of the gas hob has a 1/2" thread that allows for:
- A fixed connection
- Connection using a flexible pipe (L min. 1 m - max. 3 m).
• The watertight seal supplied must be inserted between the manifold outlet and the gas supply.
• You must prevent the pipe from coming into contact with moving parts of the kitchen unit (for
example, a drawer) and prevent access to any spaces which might become obstructed.
Gas specification
Model
Gas type and pressure
Heat input orifice size marked (mm)
HBH-M402IEGBK
Rapid
Semi-Rapid
Auxiliary
3.0kw (218g/h)
1.75kw (127.5g/h)
1.0kw (73g/h)
G20 20 mbar
1.30
1.00
0.78
G30 29 mbar
0.87
0.66
0.50
Danger of leaks!
If any connection is handled, check the seal. The manufacturer is not liable for any connection leaking, after
being handled.
Bekijk gratis de handleiding van Heinner HBH-M402IEGBK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HBH-M402IEGBK |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 13479 MB |
