Handleiding
Je bekijkt pagina 8 van 65
www.heinner.com
7
ELECTRICAL CONNECTION
• This appliance must be earthed.
• This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.
• The wires in the mains lead are coloured in accordance with the following code;
• Green/yellow = Earth
• Blue = Neutral
• Brown = Live
The wire which is coloured green and yellow must be connected to the terminal which is marked with
the letter E or by the earth symbol.
Gas adjustment
• Take precautions on the operations and adjustments to be carried out when converting from one gas
to another.
• All work must be carried out by a qualified technician.
• Before you begin, turn off the gas and electricity supply to the appliance.
Change the injector of the burners.
Remove the pan support, Burner lid and Flame spreader.
Unscrew the injector using a 7mm box spanner and replace it with the stipulated injector for new gas
supply.
Carefully reassemble all components.
After injectors are replaced, it is advisable to strongly tighten the injector in place.
Adjustment of minimum level of the flame.
1.Turn the taps down to minimum.
2.Remove the knob from the tap and place a small, bladed screwdriver in the centre of the Adjustment
screw.
3.The correct adjustment is obtained when the flame has a length of about 3-4 mm.
- For butane/ propane gas, the adjusting screw must.
- be tightly screwed in.
- Refit the control knob
Bekijk gratis de handleiding van Heinner HBH-M402IEGBK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HBH-M402IEGBK |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 13479 MB |
