Handleiding
Je bekijkt pagina 7 van 43
www.heinner.com
6
6. USE OF THE APPLIANCE
Lighting
Light replacement
• Switch off the extractor hood and isolate the extractor hood by pulling out the mains plug or switching
off the fuse.
• Remove the grease filter.
• Remove the light by levering its fitting from the hood body (this may require pressure or force to be
applied).
• Disconnect the connector of the light.
• Replace the light with a new one of the same type, making sure that you connect the light with the light
cable correctly.
• Reconnect the power by inserting the mains plug or by switching on the fuse.
•
Max power
Voltage
Picture
ILCOS D code
Self-ballasted LED
modules
1.5 W
220V-240V~
Square/Diameter: 33.2mm x
120mm
DBS-1.5-H-33.2/120
• Clean ventilation frequently. Grease should not be allowed to accumulate on fan or filter.
Cleaning and maintenance
Disconnect range hood from power supply before cleaning or servicing.
• Cleaning the surface of hood frequently. Use mild soap or detergent to clean the hood.
• Do not use harsh alkalis or abrasives.
• Avoid the use of scouring powers or dishwasher compounds.
• Grease filter may be washed using mild soap or detergent. (Heavy grease build-up may not be cleaned
easily and the filter may require replacement).
• Charcoal filter cannot be cleaned and must be replaced regularly.
Bekijk gratis de handleiding van Heinner CH-MD200WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | CH-MD200WH |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 9515 MB |
