Handleiding
Je bekijkt pagina 8 van 43
www.heinner.com
7
Information
• Cleaning water must not inter into motor, control switch etc. electrical parts.
• It is recommendable to clean the metallic filter every three months by carrying out the following
instruction:
• Remove the metallic filter from the cooker hood and wash it in asolution of water and neutral liquid
detergent, leaving to soak.
• Rinse thoroughly with warm water and leave to dry.
• The metallic filter may alter in color after several washes. This is not cause for customer complaint or
replacement of metallic filter.
Information
• There is a fire risk if cleaning is not carried out in accordance with the instructions.
Check valve installation
Hold on check valve with your hands, align the box gap, put in the check valve, and then spin to a certain
angle until three angles of the valve are stuck. Installation is complete. The fixing type for external air-guides
and check valve shall comply with the requirement of standard IEC/EN 60335-1.
Installing the carbon filter
• Remove the grease filter and remove the iron wire.
• The filter cotton is located on the metal mesh and fixed by iron wire.
• Replace a new filter cotton, apply reverse procedure for reinstallaiton.
Warning: the filter cotton cannot be washed or recycled. It should be replaced after approximately 2-3
months of use.
Remark: Filter cotton is not supplied with your appliance(optional).
Bekijk gratis de handleiding van Heinner CH-MD200WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | CH-MD200WH |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 9515 MB |
