Handleiding
Je bekijkt pagina 50 van 73
Installing, connecting and start-up Page EN-13
Installing, connecting and start-up
CAUTION
Risk of injury!
The appliance is heavy and bulky. It can
injure you if it tips over.
n
Get another person to help with mov-
ing and installation.
CAUTION
Fire hazard!
Improper handling of the oven may result
in damage or cause a fire. Heat trapped
inside the appliance may shorten its ser-
vice life.
n
Ensure sufficient ventilation. Do not
cover the vents, for example with oven
gloves or cookery books!
n
When installing the appliance, follow
the dimension specifications for ventil-
ation.
NOTICE
Risk of damage!
Improper handling of the appliance may
result in damage.
n
Do not use sharp objects to unpack
the appliance.
n
Do not use the oven door and door
handle as a step or for lifting.
Moving and unpacking
– Move the appliance using a trolley or
with the help of a second person.
– Carefully unpack the appliance and re-
move all packaging, plastic moulding,
adhesive strips and foam padding from
the inside, outside and back of the appli-
ance.
Installing the oven
The oven is designed for installation in
standard kitchen units. It can be installed in
a tall cupboard and underneath the work-
top.
The following conditions must be observed:
– Do not install the oven directly next to a
refrigerator or freezer. This will increase
its energy consumption unnecessarily
due to heat dissipation.
– The best place is next to the sink. They
have an additional storage area and
dirty dishes can be cleaned immediately.
– Before installation, check whether the
appliance dimensions are compatible
with your furniture dimensions.
– If necessary, your built-in furniture must
be reworked accordingly. If you have no
manual skills, you should hire a profes-
sional.
– For built-in furniture, veneers or plastic
coverings must be processed with heat-
resistant adhesive (at least 100 °C). If
the adhesive and surfaces are not heat-
resistant, the covering may warp and
come loose.
– If a drawer is placed underneath the
oven, an intermediate base is required.
– The installation recess may not have a
rear panel, at the most it may have an
add-on edge measuring no more than
50 mm.
– The built-in cupboard can be optionally
equipped with strips or an intermediate
base with a ventilation cutout.
Bekijk gratis de handleiding van Hanseatic HBCO707A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HBCO707A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 8072 MB |
