Hanseatic GV HB-324 handleiding
Handleiding
Je bekijkt pagina 54 van 83
Page EN-12 Set-up, connection and initial start-up
n
Do not cut through the inlet hose. It
contains electrical components. If the
inlet hose is damaged, have it re-
paired by a specialist.
n
Do not use old or previously installed
inlet or outlet hoses. Only use the sup-
plied hoses.
n
The outlet hose must be at least 40
mm in diameter to allow the water to
be pumped out freely.
n
Do not attach the outlet hose yourself,
have it installed by a specialist
plumber. Have the outlet hose
checked regularly for damage or
kinks.
Make sure that the appliance is con-
nected to a water supply with a safety
device that prevents drinking water
from being contaminated by backflow
(according to DIN EN 1717). Connec-
tion valves intended for this purpose
must be installed in a suitable place in
a correctly installed drinking water
system in the house. If you are un-
sure, consult a qualified professional.
¾ inch
Inlet hose
You will require a valve with a ¾-inch
screw connector for the water supply.
1. Screw the safety valve’s lock nut to the
tap hand-tight.
2. Check that the connection to the water
tap is sealed. Turn on the water tap
slowly and ensure that no water is es-
caping. Then close the tap again.
Connecting the mains plug
Before connecting the appliance, make
sure that all the safety instructions in the
"Safety" chapter are observed.
WARNING
Fire hazard!
Improper handling of the appliance can
lead to fire and damage to property.
n
Connect the appliance only to a prop-
erly installed and earthed electric
socket. Do not connect to a multi-
socket extension cable or a multi-
socket plug.
n
Please note that the appliance is not
intended to be operated by means of
an external timer or a separate remote
control system.
– Connect the appliance only to a properly
installed earthed socket with its own ad-
equate protection (220 - 240 V~/50 Hz/
10 A).
– Ensure that the socket is installed in
such a way that the recess into which
the dishwasher will be fitted is deep
enough even when the plug is plugged
in.
– Do not use a multi-socket extension
cable, multi-socket plug, travel adapter,
extension cable or similar. We recom-
mend using a pulse-sensitive residual
current device (RCD).
– Insert the mains plug into the socket.
Installation
NOTICE
Risk of damage to property!
Selecting the wrong screws can damage
the worktop.
n
Use the screws which are supplied in
the delivery or screws of an appropri-
ate length.
Bekijk gratis de handleiding van Hanseatic GV HB-324, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | GV HB-324 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 10090 MB |
