Hanseatic GV HB-324 handleiding
Handleiding
Je bekijkt pagina 53 van 83
Set-up, connection and initial start-up Page EN-11
Set-up, connection and initial start-up
Choose a suitable location
CAUTION
Risk of injury!
The appliance is heavy and bulky. Im-
proper handling of the appliance may res-
ult in injury.
n
When transporting, use a transport
cart and call on the help of another
person.
n
Remove all obstacles on the transport
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the floor.
n
For installation and assembly, get help
from another person.
n
Do not use the opened appliance door
as a step, seat, or support. Make sure
that children and pets do not stand or
sit on the open appliance door.
– Set up the unit only in a dry and frost-
proof room with a solid base.
– Position the appliance near a sink/wash
basin or floor drain for installation of the
connection pipes.
Having the outlet hose
connected
NOTICE
Risk of malfunction!
Failing to connect the appliance correctly
may cause malfunctions during operation.
n
Make sure that the waste water can
drain freely at any time. For this pur-
pose, the outlet hose must have a dia-
meter of at least 40 mm.
n
Ensure that there are no kinks or dam-
age to the outlet hose.
n
Make sure that the end of the hose is
not submerged in the pumped water.
n
Do not extend the outlet hose or re-
place with another drainage pipe.
Ø ≥ 40 mm
max. 1100 mm
You can connect the end of the outlet hose
in two different ways:
– Connection to a floor drain.
– Direct connection to the odour seal (si-
phon) of your washing/dishwashing
basin. Technical measures are required
for this. Therefore, only sanitary person-
nel or staff of our service are allowed to
connect the outlet hose (see chapter
"Service"). The outlet hose must be a
maximum of 1,100 mm above the floor.
Connecting the inlet hose
NOTICE
Risk of damage to property!
The appliance is designed for a water
pressure of 0.4 to 10bar (0.04 to 1.00
MPa).
n
If the water pressure is higher than
this, install a pressure reducer. If in
doubt, enquire about the water pres-
sure with the water supply company.
n
Never connect the appliance to the tap
or mixing valve of a hot water heater
(instantaneous water heater, pres-
sure-less boiler, etc.).
n
Ensure that the inlet hose is not
kinked and is carefully connected.
Bekijk gratis de handleiding van Hanseatic GV HB-324, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | GV HB-324 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 10090 MB |
