HammerSmith SharpSpin handleiding
Handleiding
Je bekijkt pagina 9 van 28

9
charging; this is entirely normal.
WARNING! Do not exceed the maximum charging time
of 8 hours, as there is a risk of overheating! We recommend
connecting the charger to a timer.
1. Insert the charging cable connector into the charging port of
the device (see #2) and then connect the charger to the power
source.
2. The charge status LED shows the charging progress. The
indicator lights up red during charging.
3. When charging is complete, the charge status LED light will
turn green.
NOTE: We recommend fully charging the device after having
not used it for an extended period of time.
Commissioning & safety lock switch
The safety lock switch is designed to prevent accidental operation
and to lock the device.
To release the lock, press the safety lock switch on one side
of the handle, and simultaneously press the on/off button. The
device is now in operation.
When you release the on/off button, the device will lock again
and must be unlocked once more as described above for further
operation.
REMOVING AND INSTALLING THE BLADE
IMPORTANT! Before removing the blade, make sure the
device is unplugged.
1. Hold the blade firmly in place using flat-nose pliers, unscrew
the fixing screw anti-clockwise using a flat-nose screwdriver
(not included) of the appropriate width, and remove the screw.
(see #3)
2. Slide the blade away from the blade guard and remove it. (see
#4)
3. Now slide the new blade under the blade guard with the
beveled edges facing toward you.
4. Align the hole in the blade with the mounting hole and the
mounting pins, insert the screw, and tighten the mounting
screw clockwise until hand-tight. (see #5)
For a reliable and always-sharp cut, you can get
replacement blades at www.mediashop.tv or by calling the
order hotline: 0800 400 66 50* *free of charge from Germany,
Austria and Switzerland
MAINTENANCE AND CLEANING
• Only ever clean the housing using a damp cloth. Do not use
solvents! Then dry it thoroughly.
• To maintain battery capacity, we recommend fully discharging
and recharging the battery every two months.
• Only store the battery in a fully charged state, and replenish
the charge from time to time. The device should be stored in a
dry and frost-free place.
TECHNICAL DATA – Hammersmith SharpSpin (Basic)
Device: Battery: 1x Lithium ion 3,6V⎓ 1300mAh 4,68Wh
Power supply unit/adapter: Input: 100-240V~ 50/60Hz
Output: 5,5V⎓ 0,3A 1,65W
TECHNICAL DATA – Hammersmith SharpSpin Pro
Device: Battery: 1x Lithium ion 3,6V⎓ 2000mAh 7,2Wh
Power supply unit/adapter: Input: 100-240V~ 50/60Hz
Output: 5,5V⎓ 0,5A 2,75W
Made in China
FR
AVERTISSEMENTS ET CONSIGNES DE SÉCURITÉ
Lisez les consignes de sécurité et les
instructions avec attention. Le non-respect
des avertissements et des instructions peut avoir
pour conséquence des blessures graves. Conservez
le mode d‘emploi pour référence future.
• N‘utilisez cet appareil qu‘aux fins prévues dans le présent
mode d‘emploi.
• Lors de l‘utilisation d‘outils, de machines ou d‘appareils
électriques, toujours observer les mesures de sécurité
de base visant à réduire le risque d‘incendies, de chocs
électriques et de blessures corporelles.
• ATTENTION ! La lame est acérée.
• Avant d‘utiliser l‘appareil, contrôlez s‘il présent des défauts
afin d‘assurer qu‘il fonctionne de manière irréprochable
et qu‘il remplit sa fonction prévue. Contrôlez si la vis
de fixation de la lame est serrée ; si ce n‘est pas le cas,
serrez-la.
• Ne touchez pas la lame à mains nues après l‘utilisation.
Une fois le travail terminé, la lame peut être extrêmement
chaude.
• Maintenez à tout moment la zone de travail propre. Les
M38202_M38236_Hammersmith_SharpSpin_SharpSpinPro_Manual_20250528_PW.indd 9M38202_M38236_Hammersmith_SharpSpin_SharpSpinPro_Manual_20250528_PW.indd 9 28.05.25 10:3428.05.25 10:34
Bekijk gratis de handleiding van HammerSmith SharpSpin, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | HammerSmith |
| Model | SharpSpin |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4401 MB |
