Haier X Series 11 HWD120-BD16397 handleiding

Wasmachine

Haier

40 pagina's

PDF beschikbaar

Handleiding

8-7

9-6 9-7

9-8 9-9

1. Turn oﬀ and unplug the machine (Fig. 9-8).

2. Push and open service ﬂ ap (Fig. 9-9).

3. Provide a ﬂ at container to catch leach water

(Fig. 9-10). There could be bigger amounts!

4. Pull the drainhose out and hold its end above the

container (Fig. 9-10).

5. Take the sealing plug out of the drainhose (Fig.

9-10).

6. After complete drainage close drainhose (Fig.

9-11). and push it back into the machine.

7. Unscrew and remove counter clockwise the

pump ﬁ lter (Fig. 9-12).

8. Remove contaminants and dirt (Fig. 9-13).

9.5 Long periods of disuse

If the appliance is left idle for a longer period:

1. Pull out the electrical plug (Fig. 9-6).

2. Turn oﬀ water supply (Fig. 9-7).

3. Open the door to prevent formation of moisture

and odours. Let door open while not used.

Before next usage check carefully power cord, water

inlet and drain hose. Make sure everything is properly

installed and without leackage.

WARNING!

Scalding Risk! Water in the pump ﬁ lter can be very hot! Before any action please ensure

water has cooled down.

9.6 Pump ﬁ lter

Clean the ﬁ lter once a month and check the pump ﬁ lter

for instance if the appliance:

▶ Doesn´t drain the water.

▶ Doesn´t spin.

▶ Cause unusual noise while running.

Bekijk gratis de handleiding van Haier X Series 11 HWD120-BD16397, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.