Haier X Series 11 HWD120-BD16397 handleiding

Wasmachine

Haier

40 pagina's

PDF beschikbaar

Handleiding

9-1

9-2

9-5

9.1 Cleaning the detergent drawer

Take always care there are no detergent residues.

Clean the drawer regularly (Fig. 9-1):

1. Pull out the drawer until it stops.

2. Press the release button and remove the drawer.

3. Wipe the inside of the sink clean with a towel.

4. Flush the drawer with water until it is clean

and insert the drawer back in the appliance.

9.2 Cleaning the machine

▶ Unplug the machine during cleaning and mainte-

nance.

▶ Use a soft cloth with soap liquid to clean the ma-

chine case (Fig. 9-2) and rubber components.

▶ Do not use organic chemicals or corrosive solvents.

9.3 Water inlet valve and inlet valve ﬁ lter

To prevent blockage of water supply by solid substanc-

es like lime clean regularly the inlet valve ﬁ lter.

▶ Unplug the power cord and turn oﬀ the water

supply.

▶ Unscrew the water inlet hose at the back (Fig.

9-3) of the appliance as well as on the tap.

▶ Flush the ﬁ lters with water and a brush (Fig. 9-4).

▶ Insert the ﬁ lter and install the inlet hose.

▶ Turn on the tap to see if it leaks.

9.4 Cleaning the drum and gasket

▶ Remove accidentally washed items, especially metal

parts such as pins, coins, etc. from the drum and the

groove of the door gasket (rubber ring) because

they cause rust stains and damage.

▶ Use a non-chloride cleaner for removing rust

stains. Observe the warning hints of the cleaning

agent manufacturer.

▶ Do not use any hard objects or steel wool for cleaning.

▶ After the procedure, open the door, use a towel to

clean the stains and foam around the gasket, and

keep the inside and outside of the gasket clean

(Fig. 9-5).

9-3 9-4

Note: Hygiene

If necessary, add a special machine

Self-clean" within

cleaner.

Bekijk gratis de handleiding van Haier X Series 11 HWD120-BD16397, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.