Haier X Series 11 HWD120-BD16397 handleiding
Handleiding
Je bekijkt pagina 29 van 40
CAUTION!
▶ Pump fi lter sealing has to be clean and unhurt. If the lid is not full tightened,
water can escape.
▶ The fi lter must be in place, or it may lead to leakage.
9. Clean carefully pump fi lter, e.g. using running water
(Fig. 9-14).
10. After cleaning, reinstall the handle and tighten it
until it does not move. At this time, the handle is in
vertical state (Fig. 9-15).
11. Close service fl ap.
9-14
29
9.7 Filter screen
1. Turn o and unplug the machine.
2.
Hold the wire chip lter handle and pull it out hori-
3.
Clean the lter with water and a soft brush(Fig. 9-
4.
After cleaning, air dry or dry with a soft towel.
5.
Use a soft brush to clean the lumen of the lint lter.
6.
After cleaning, reinstall the lint lter back into the
Note!
It is recommended to clean the lint lter every time
not used for a long time, it is recommended to clean
the lint lter every 5 wa
Do not run the machine without installing a lint lter.
During the operation of the lint lter, water droplets
9-16
zontally(Fig. 9-16).
17).
9-17
machine(Fig. 9-18).
9-18
1.
the drying program is run . If the drying function is
shing cycles.
2.
3.
may fall o. Please pay attention to protection.
Bekijk gratis de handleiding van Haier X Series 11 HWD120-BD16397, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | X Series 11 HWD120-BD16397 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5800 MB |
