Handleiding
Je bekijkt pagina 21 van 410
21
USE OF PERSONAL BLENDER
Note:
* If the unit is plugged in and powered on, but the jug and blade assembly
is not properly installed, the motor will be disabled.
1. Plug into the motor base and place on a clean, dry, smooth, level surface
such as a worktop or table.
2. Add liquid and ingredients to the personal blender jug. Do not add
ingredients above the “MAX” line. [Fig. 50]
3. Place the blades assembly on the top of the jug and turn clockwise to
seal. [Fig. 51]
4. Turn the jug upside down and install on the motor base. Then, turn on
clockwise until it clicks. Once locked in place, the personal blender
programs will display on the screen and the unit will be ready for use.
[Fig. 52]
5. Turn on the knob to choose preferred program to start, then wait for the
unit to come to a complete stop.
6. Remove the jug from the motor base by turning it anti-clockwise and then
lift up. [Fig. 53]
7. Turn the jug upside down. Remove the blade assembly by twisting
anti-clockwise. And close it by personal lid so it could be taken out
conveniently. Exercise carefully when handling the blade assembly, as the
blades are sharp. [Fig. 54]
8. To enjoy the journey, please ensure the personal lid is twisted on personal
jug rmly to avoid liquid leakage.
9. Turn the unit off. Unplug the unit when nished. Refer to the care &
maintenance section for cleaning and storage instructions.
[Fig. 54]
[Fig. 51]
[Fig. 53]
[Fig. 50]
[Fig. 52]
GB
Bekijk gratis de handleiding van Haier HBL7W5 001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | HBL7W5 001 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 56136 MB |